- $
Recommended news
- How to maintain Chongqing micro cultivator when it is parked for a long time
- When using micro cultivator, it should be used according to its performance and technical indexes
- "Three senses" identification method of micro cultivator accessories
- Selection criteria and suggestions of knife set of Chongqing micro cultivator
- Defect discrimination and cleaning method of micro cultivator accessories
Your location：Home > Information dynamic
> Company dynamics
Operation key of Chongqing micro cultivator in Greenhouse
Source:www.ztqu.com.cn Release time:2021/11/13 11:13:27
Chongqing micro cultivator is also called micro cultivator, pastoral management machine. It belongs to tractor variation and has unique operation mode and structural characteristics.
Micro tiller was produced in the 1970s and 1980s. The primary use of wheat, rice and garden fields. Through more than 20 years of improvement, its skills basically tend to mature at the beginning of the new century.
1. It is necessary for operators to master the application performance of micro cultivator. It is necessary for new operators or drivers of new machines and tools to practice outside the shed. Do not practice in the shed to avoid accidents.
2. Strictly control the ploughing depth. The depth is generally controlled by the depth limiting rod and the driver. The depth limiting rod is lifted upward, and the tillage depth becomes deeper and shallower downward. The operator presses down the handle to deepen the tillage, and lifts or pushes forward the handle to shallow the tillage.
3. Do not lift the handle when there are obstacles in front or near the shed, otherwise the micro tiller will rush forward quickly, which is easy to cause risks. Reduce the throttle first, determine the safe driving route, and then gradually lift the handle to turn or avoid obstacles.
4. Select appropriate unit tillage width. The width of the tillage width of the unit is consistent with the net seed width of the pool.
5. The protective cover on the unit shall not be removed at will, and operation and commissioning without protective cover are not allowed.
6. The soil moisture of cultivation shall be appropriate, not too large or too small, otherwise it will affect the operation quality.
Compared with other farmland machinery, the whole micro cultivator has the characteristics of small volume, simple structure, simple operation, high output power and good comprehensive utilization. It is mainly composed of engine, transmission, operation and operation parts. The engine is the power source of the micro cultivator, mainly including gasoline and diesel. The general power is between 2.2 ~ 5.1kw, both of which are single cylinder engines. The function of the transmission system is to transmit power, reduce speed and increase torque, mainly including transmission box, pulley or sprocket, V-belt or chain, etc. Operating parts: mainly rotary blade assembly, including rotary blade shaft, rotary blade and pin, etc. The rotary tiller shaft is generally welded with the tool handle base, which is used to install the rotary tiller. Rotary tillage cutter is the cutting part of rotary tillage, which is divided into L-type obtuse angle cutter and L-type right angle cutter. The obtuse angle knife has good penetration performance and labor saving. It is selected when the plot is hard. The right angle knife has good soil crushing effect and can be used in plots with less solid land. Operating device: mainly including handle, concentrator, gear lever, throttle, etc. The operation direction of the micro tiller is controlled by the handle, which can be adjusted from left to right, up and down. The concentrator and throttle operating handle are respectively arranged on the handle for easy operation.
Micro tiller was produced in the 1970s and 1980s. The primary use of wheat, rice and garden fields. Through more than 20 years of improvement, its skills basically tend to mature at the beginning of the new century.
1. It is necessary for operators to master the application performance of micro cultivator. It is necessary for new operators or drivers of new machines and tools to practice outside the shed. Do not practice in the shed to avoid accidents.
2. Strictly control the ploughing depth. The depth is generally controlled by the depth limiting rod and the driver. The depth limiting rod is lifted upward, and the tillage depth becomes deeper and shallower downward. The operator presses down the handle to deepen the tillage, and lifts or pushes forward the handle to shallow the tillage.
3. Do not lift the handle when there are obstacles in front or near the shed, otherwise the micro tiller will rush forward quickly, which is easy to cause risks. Reduce the throttle first, determine the safe driving route, and then gradually lift the handle to turn or avoid obstacles.
4. Select appropriate unit tillage width. The width of the tillage width of the unit is consistent with the net seed width of the pool.
5. The protective cover on the unit shall not be removed at will, and operation and commissioning without protective cover are not allowed.
6. The soil moisture of cultivation shall be appropriate, not too large or too small, otherwise it will affect the operation quality.
Compared with other farmland machinery, the whole micro cultivator has the characteristics of small volume, simple structure, simple operation, high output power and good comprehensive utilization. It is mainly composed of engine, transmission, operation and operation parts. The engine is the power source of the micro cultivator, mainly including gasoline and diesel. The general power is between 2.2 ~ 5.1kw, both of which are single cylinder engines. The function of the transmission system is to transmit power, reduce speed and increase torque, mainly including transmission box, pulley or sprocket, V-belt or chain, etc. Operating parts: mainly rotary blade assembly, including rotary blade shaft, rotary blade and pin, etc. The rotary tiller shaft is generally welded with the tool handle base, which is used to install the rotary tiller. Rotary tillage cutter is the cutting part of rotary tillage, which is divided into L-type obtuse angle cutter and L-type right angle cutter. The obtuse angle knife has good penetration performance and labor saving. It is selected when the plot is hard. The right angle knife has good soil crushing effect and can be used in plots with less solid land. Operating device: mainly including handle, concentrator, gear lever, throttle, etc. The operation direction of the micro tiller is controlled by the handle, which can be adjusted from left to right, up and down. The concentrator and throttle operating handle are respectively arranged on the handle for easy operation.
